Skip to content
SkillPass

On the Job Training (OJT): Meaning, Methods and How to Plan It

On the job training (OJT) is learning at the workplace while doing the real work: an experienced person shows and explains a task, the learner repeats it and practices until they can do it alone. The opposite is off the job training in classes or seminars. Common types are job instruction with the four step method, job shadowing, mentoring and job rotation. On the job training is inexpensive and practical, but it depends entirely on the person who trains.

Author: Kevin Baur BSc

Published on

Contents
Title card: on the job training, learning at the workplace, with methods, the four step method and six steps

Most people do not learn their job in a classroom. They learn it at their desk or machine: a colleague shows how invoices are checked, a supervisor explains the equipment, and by the third time it works without help. That is on the job training. This guide explains what on the job training (OJT) means, how it differs from off the job training, which methods it includes, how the classic four step method works and how to plan on the job training in six steps.

What is on the job training?

On the job training, often shortened to OJT, is learning at the workplace while doing the real work. Wikipedia describes it as a form of training provided at the workplace: new employees get to know their working environment and gain hands on experience with machinery, equipment, tools and materials. An experienced employee or a manager acts as a mentor and passes on knowledge and company specific skills through written or verbal instructions and demonstrations.

Typical on the job training examples:

  • A new accounts payable clerk posts the first supplier invoices while a colleague sits next to her and checks each entry.
  • A new production worker changes over a machine under supervision first and then alone.

According to Wikipedia, it is one of the oldest forms of training: in the Middle Ages, apprentices learned a trade by working alongside a master, and apprenticeship contracts usually lasted six years. Wikipedia also calls it the most popular training method in the United States and in most other developed countries, such as the United Kingdom, Canada and Australia.

On the job training vs off the job training

The opposite is off the job training: learning away from the workplace in classes, lectures, seminars or e learning. Wikipedia compares the two like this:

On the job training and off the job training compared
CategoryOn the job trainingOff the job training
LocationAt the actual job locationAway from the job location
ApproachPractical, learning by doingTheoretical, acquiring knowledge
Who trains?Employees, internal trainers or managersOften experts from outside the company
CostInexpensiveMore expensive
Effect on workWork continues, the trainee produces while learningWork pauses during the training

Types of on the job training

On the job training is an umbrella term. It covers several methods that differ in how active the learner is and how long they take:

Types of on the job training at a glance
MethodHow it worksBest for
Job instructionAn experienced person shows a task step by step, the learner repeats itClearly defined, repeated tasks
Job shadowingThe learner follows an experienced person and watchesUnderstanding a role, preparing a handover
MentoringRegular conversations with an experienced person about work and developmentExperience, judgment, network
Job rotationPlanned moves between tasks or positionsBroad skills, cover within the team
Learning by doing with feedbackThe learner works alone from the start, an experienced person reviewsTasks with low risk

The guide to job shadowing covers the watching part in detail, and the guide to mentoring covers support over months.

The four step method of job instruction

The best known way to structure job instruction comes from Training Within Industry (TWI), a service created by the US Department of War that ran from 1940 to 1945. According to Wikipedia, experienced workers were being drafted into the army just as industry needed to produce more, so new workers had to be trained fast. By the end of the Second World War, over 1.6 million workers in over 16,500 plants had received a certification. The Job Instruction course taught supervisors and experienced workers four steps:

  1. Prepare: explain the goal, the tools and the safety rules, and find out what the learner already knows.
  2. Show and explain: break the job into steps and show each one while explaining the key points and the reasons for them.
  3. Try out under coaching: the learner does the job under close coaching and explains the steps and key points back. Mistakes are corrected right away.
  4. Step back gradually: the learner works alone more and more, the trainer checks in less and less.

The course had a well known credo: if the worker hasn't learned, the instructor hasn't taught. The method has limits, though. It works best for manual, clearly defined and repeated tasks. For work that is mostly about knowledge and decisions it fits less well, because knowledge cannot simply be demonstrated and copied.

Benefits and disadvantages of on the job training

Wikipedia lists points on both sides:

  • Benefits: it is cost effective because no external courses are needed. Work continues during training. People learn with the real tools and documents of the business and get to know the team and its values along the way.
  • Disadvantages: the trainer is taken away from their own work. Training is often rushed. If safety precautions are not taught first, practical work with machinery can lead to injuries.

One disadvantage many guides leave out: on the job training depends entirely on the person who trains. Whatever they do not show, because it does not come up or because they have never put it into words, nobody learns.

How to plan on the job training in 6 steps

1. Define the goal and the tasks

Write down which tasks the person should handle alone at the end and how you will know. The job description is a good starting point, and a skills matrix shows who on the team already masters each task.

2. Choose the right trainer

Not every expert explains well. Pick someone who knows the task well and give them time for it in their own workload. Safety training is a separate duty: in the UK, the Health and Safety Executive says employers must give workers clear instructions, information, adequate training and supervision, including new recruits and people changing jobs. Check the rules that apply where you work.

3. Break the task down and write it down

As in job instruction: main steps, key points for each step and the reasons. Ideally the experienced person writes this up as a short instruction. The SOP examples show what that can look like, and the free SOP template gives you a structure to fill in.

4. Make a schedule

Decide the order of the tasks and when the person should handle each one alone. For new hires, a 30 60 90 day plan works well.

5. Practice with feedback

Let the person do real work early, first with every result checked, then with spot checks. Set short fixed slots for questions.

6. Check and follow up

At the end, the person completes the task once entirely alone, including rare exceptions. Whatever is still missing goes into the instruction. A follow up after a few weeks shows whether it has stuck.

Example: training a new accounts payable clerk

A made up example shows how the methods fit together when a new employee takes over accounts payable:

Four week example plan (made up example)
PeriodTaskMethodGoal
Week 1Check and post supplier invoicesJob shadowing, then job instructionPost standard invoices with review
Week 2Prepare the payment runJob instructionPayment run approved by the colleague
Week 3Handle supplier queriesLearning by doing with feedbackSolve typical cases alone
Week 4Month end close for payablesDone togetherProcess known, instruction updated

Anything that does not come up in four weeks, such as the year end close or a switch of payment provider, is not learned this way. That needs a written instruction.

Where on the job training reaches its limits

On the job training assumes that the person with the knowledge is there and has time. That is often exactly what is missing. If the only person who can do a task resigns, there may be a few weeks in which they also have to finish their own work. Part of what they know is tacit knowledge that they can barely explain. And the bus factor of that task stays at 1 until someone can really do it alone. That is why training and writing things down belong together.

Conclusion

On the job training means learning while doing the real work, guided by an experienced person. For clearly defined tasks, the four step method from Training Within Industry still works: prepare, show, try out, step back. Plan the training with a goal, a suitable trainer, a schedule and regular feedback, and write the steps down along the way so the knowledge does not depend on a single person.

Frequently asked questions

What does on the job training mean?
On the job training means learning at the workplace while doing the actual job. An experienced colleague or a manager shows and explains the tasks, and the learner takes them over step by step. It is often shortened to OJT.
What is the difference between on the job and off the job training?
On the job training happens at the actual workplace, is practical and is usually led by colleagues or managers. Off the job training happens elsewhere, for example in classes, seminars or e learning, and focuses more on knowledge than on hands on skills. The two work well together.
What are examples of on the job training?
A new clerk posting invoices while a colleague checks each entry, a production worker changing over a machine under supervision, or a colleague covering a role for two weeks and reviewing difficult cases every evening. Methods include job instruction, job shadowing, mentoring, job rotation and learning by doing with feedback.
What are the four steps of job instruction?
Prepare the learner, show and explain the task step by step with its key points and reasons, let the learner try it under close coaching while explaining it back, and then step back gradually. The method comes from the US Training Within Industry program of the Second World War and suits clearly defined, repeated tasks best.
How long does on the job training take?
There is no fixed length. A single task can be learned in an hour, a whole role takes weeks or months. Plan in stages with clear goals, for example in a 30 60 90 day plan, and check at the end whether the person can also handle rare exceptions alone.

Sources

Back to overview